介绍了小波技术在声发射信号处理中的应用和研究。用轴承试验台验证了小波技术诊断轴承故障的可行性。结合声发射在国内某钢厂设备检测诊断的实例与传统的振动信号进行了对比,表明声发射技术在设备故障诊断中具有重要作用。

通过对车辆传感器产生波形的比较分析，得出故障部位的诊断方法，介绍传统示波器在现代汽车维修的应用。

根据JK触发器的功能，通过观察和分析同步十进制加法驻地数器的输出波形，找出各JK触发器的连接方式，从而完成同步十进制加法计数器的设计。

采用纵波直探头和自磨制经校准的斜楔横波探头，对钨合金壳体部件进行了检测，并对钨合金壳体的缺陷定位、典型缺陷及其对应的回波特征进行了研究。结果表明，采用超声检测能够检测出钨合金内的孔洞、裂纹及“鸟巢”等缺陷。单个孔洞反射回波高，前沿较尖锐；密集气孔回波参差不齐，根部互相连接；裂纹回波高而尖锐，底波有所下降；“鸟巢”缺陷的反射波根部有若干小波峰出现。

A new electro-hydraulic exciter that consists of rotary valve and micro-displacement double-functioned hydraulic cylinder was proposed to realize different kinds of waveforms.Calculated fluid dynamics(CFD) simulation of rotary valve orifice reveals that orifice exists the two-throttle phenomenon.According to the finding,the revised flow area model was established.Vibration waveforms analysis was carried out by means of mathematic model and the related experiments were validated.Furthermore,as a new analysis indicator,saturation percentage was introduced first.The experimental results indicate that the revised flow area model is more accurate compared to the original one,and vibration waveforms can be optimized through suitable spool parameters and the revised cylinder structure.